5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Toggle Bolt Wings
Mounting to drywall (continued)
3
Preparing to mount to a drywall mounting surface
□
Loosen the electrical box screws (AA) and turn the mounting bracket (B)
until the heads of the electrical box screws (AA) are in the large ends of the
keyholes, to take down the mounting bracket (B).
□
Drill four 5/8 in. holes at the locations marked on the mounting surface,
making sure the holes are large enough for the closed wings of the
toggle bolt (EE) to pass through.
□
Remove the wings from each toggle bolt (EE).
□
Insert each toggle bolt (EE) through the mounting holes on the
mounting bracket (B) and then reattach the wings.
□
Connect the metal wiring ring (DD) to the mounting bracket (B) using
the wiring ring screw (CC).
noTe:
The safety cable(s) attached to the mounting bracket (B) should
face away from the mounting surface.
4
Attaching the mounting bracket to the electrical outlet box and mounting surface
□
With help from another person, hold the mounting
bracket (B) up to the ceiling and feed the electrical
connection wires from the electrical outlet box through
the metal ring (DD) and center opening in the mounting
bracket (B).
□
With the electrical box screws (AA) extended to their
full length, place the large end of the keyholes on the
mounting bracket (B) over the electrical box screws (AA).
□
Turn the mounting bracket (B) so the heads of the
electrical box screws (AA) slide into the narrow portion of
the keyholes.
□
When the position of the toggle bolts (EE) coincides with
the location of the holes drilled in the ceiling, squeeze the
wings on each toggle bolt (EE) into the closed position and
insert them one by one into the holes drilled in the drywall
mounting surface.
□
Tighten the toggle bolts (EE) until the mounting
bracket (B) is flush to the ceiling.
□
Tighten the electrical box screws (AA) to finish securing
the mounting bracket (B) to the mounting surface.
DD
CC
Mounting Holes
EE
AA
B
EE
Keyholes
DD
Keyholes
B
