HAMPTON BAY 1002 563 390, Инструкция по использованию и уходу, Страница: 6 / 10

6
Assembly
1
ATTACHING THE SEAT
FRAME TO THE BACK FRAME
2
ATTACHING THE LEFT AND
RIGHT ARM
□ Remove all the protective material carefully. Avoid
cutting the surface of the furniture while removing the
packaging material on all components.
□ Place the Seat Frame (A) on a soft, flat non-abrasive
surface.
□ Loosely attach the Back Frame (B) to the Seat Frame
(A)
with the
M6x30
Hex Bolts (BB) and
d6xD12x1 Flat
Washers (FF) . Do not put the M6 Hex Bolt Caps (JJ)
on the
M6x30
Hex Bolts (BB) until the assembly is
complete.
NOTE : Do not tighten bolts completely until assembly
is complete.
□ Loosely attach the Left Arm Frame (D) to the Seat
Frame (A) using the M6x30 Hex Bolts (BB) and
d6xD12x1 Flat
Washers (FF).
□ Loosely attach the Left Arm Frame (D) to the Back
Frame (B) by aligning the bolt holes in the Left Arm
Frame (D) with the bolt holes in the Back Frame (B)
and securing with the
M6x55
Socket Bolts (CC) and
d6xD12x1 Flat Washers
(FF).
□ Repeat the same process above to attach the Right
Arm Frame (C) to Seat Frame (A) and Back Frame
(B) .
□ Once all the bolts are in place, securely tighten all the
M6x30 Hex Bolts
(BB) with the Hex Wrench (LL) and
tighten all the M6x55 Socket Bolts (CC) with the Hex
Screw Driver (MM). Do not put the M6 Hex Bolt Caps
(JJ) and Socket Bolt Caps (KK) on the bolts until all
assembly is complete.
BB
FF
JJ
B
A
BB
FF
JJ
B
C
KK
CC
FF
D
A