5 HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Installation (continued)
2
Removing the battery tab from
the push button
□
Remove the back of the push button (B) by
pushing in the tab on the bottom with a small
screwdriver (not included).
□
Remove the orange battery tab from the push
button (B).
3
Installing the batteries into the
motion sensor
□
Remove the screw and cover on the back of
the motion sensor (C) using a small, Phillips
screwdriver (not included).
□
Install two “AAA” batteries. Ensure batteries
are oriented correctly.
□
Replace the cover on the back of the motion
sensor (C) and tighten the screw.
4
Removing the battery tab from
the door alert
□
Remove the back of the door alert (D) by
pushing in the tab on the bottom with a small
screwdriver (not included).
□
Remove the orange battery tab from the door
alert (D).
5
Testing the push button and
doorbell
□
Temporarily position the push button (B) where
it will be mounted.
□
Press the push button (B) to verify the
doorbell (A) and push button (B) work properly.
□
If the doorbell (A) does not sound, move the
doorbell (A) closer to the push button (B) and
test again.
NOTE:
Do not permanently mount the push button until
the push button and doorbell are working properly.
B
C
D
A
B
