J
ZZ
II
14
Attaching the light kit mounting
plate to the mounting ring
15
□
Remove one of the three light kit mounting plate
screws (II) from the mounting ring (ZZ) and loosen the
other two screws (II). (Do not remove.)
□
Place the key holes in the light kit mounting plate (J)
over the two screws (II) previously loosened from the
mounting ring (ZZ). Turn the light kit mounting plate
(J) until the light kit mounting plate (J) locks in place
at the narrow section of the key holes.
□
Secure by tightening the two mounting plate screws
(II) previously loosened and the one (II) previously
removed.
Attaching the light kit to
the switch housing
Assembly — Installing the Light Kit
□
Remove the plug (LL) from the switch housing (K).
□
Carefully feed the light kit wires (black and white)
through the hole in the switch housing (K).
□
Attach the light kit (M) to the switch housing (K) using
the nut (MM) and lock washer (NN). Tighten securely
to prevent the light kit (M) from vibrating loose.
□
Make the polarized plug connections:
- White to white
- Blue to black
NOTE:
Retain the plug (LL) to reinsert when not using the
light kit (M).
MM
NN
K
LL
M
15
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
