![HAMPTON BAY 1001010070 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/hampton-bay/1001010070/1001010070_use-and-care-manual_588167013.webp)
13 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Operation (continued)
WARNING:
Do not move or remove the glass panel, when
the appliance is plugged in and operating. This will cause
the remote control and touch panel to no longer function.
NOTE:
When the heater is first turned on, a slight odor
may be present. This is normal and should not occur again
unless the heater is not used for a long period of time.
NOTE:
To improve operation, aim the remote control at the
front of the fireplace. DO NOT press the buttons too quickly.
Give the unit time to respond to each command.
REMOTE CONTROL BATTERY INFORMATION
□
This remote control uses two AAA batteries (not included).
□
Instructions for battery installation are on the Remote
Control battery compartment.
WARNING:
NEVER dispose of batteries in fire. Failure to
observe this precaution may result in an explosion. Dispose
of batteries at your local hazardous material processing
center.
TEMPERATURE LIMITING CONTROL
This heater is equipped with a Temperature Limiting Control. Should
the heater reach an unsafe temperature, the heater will automatically
turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the power switch on the touch display PANEL to off. Wait 5
minutes.
3. Inspect the fireplace to make sure no vents are blocked, or clogged
with dust or lint. If they are, use a vacuum to clean the vent areas.
4. With the POWER switch in the OFF position, plug the power cord
back into the outlet.
5. If the problem continues, have your outlet and wiring inspected by
a professional.