7
WWW.HOMEDEPOT.CA
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1
Attaching the Stake Bases
2
Attaching the Slanting Beam
Connectors
q
Slide the Stake covers (C) over the Posts (A1). Attach the
Stake bases (B1) to the Posts (A1) using Bolts (CC) and Flat
washers (BB).
NOTE:
To avoid destroying the finish, do not put the parts
on the ground directly.
q
Attach the Slanting beam connectors (F1) to the top of the Posts
(A1) using Bolts (AA) and Flat washers (BB).
NOTE:
To avoid destroying the finish, do not put the parts
on the ground directly.
3
Connecting the Cross Beams
4
Attaching the Cross Beams
q
Attach the Middle beam connectors 1 (G1&G2) on the Cross
beams (D3&D4, E3&E4) using Bolts (JJ), Flat washers (BB),
Spring washers (LL), and Nuts (EE). Tighten the bolts.
NOTE:
To avoid destroying the finish, do not put the parts
on the ground directly.
q
Attach the assembled Cross beams (D3&D4, E3&E4) to the Posts
(A1) using Bolts (AA), Flat washers (BB) and Spring washers (LL).
Tighten the bolts.
NOTE:
To avoid destroying the finish, do not put the parts
on the ground directly.
