HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
1
Mounting the hardware
Thread the fixture mounting screws (FF)
into the provided holes of the mounting
bracket (GG).
Thread the hex nuts (BB) onto the fixture
mounting screws (FF). Do not tighten the
hex nuts (BB) at this time.
Pull the supply wires out from the outlet
box and mount the mounting bracket (GG)
to the outlet box using the bracket
mounting screws (EE).
Place the fixture pan (C) over the outlet
box and onto the fixture mounting screws
(FF).
Adjust the fixture mounting screws (FF)
until they protrude out from the fixture pan
(C) 1/4 in.
Remove the fixture pan (C) and secure the
position of the fixture mounting screws (FF)
by tightening the hex nuts (BB) against the
mounting bracket (GG).
2
Connecting the wires
Connect the black supply wire to the black
fixture wire using a wire nut (DD).
Connect the white supply wire to the white
fixture wire using a wire nut (DD).
Connect the fixture ground wire to the
supply ground wire using a wire nut (DD).
Wrap all wire connections with electrical
tape for a more secure connection.
Carefully tuck the wires and wire nuts (DD)
into the outlet box.
Installation
5
NOTE:
If you have electrical questions consult
your local electrical code for approved
grounding methods.
EE
GG
FF
BB
DD
GG
C
