HAMPTON BAY 1000 639 865, Инструкция по использованию и уходу

Страница: 5 / 24

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
1
Mounting the hardware

Thread the fixture mounting screws (EE)
into the provided holes of the mounting
bracket (FF).

Thread the hex nuts (BB) onto the fixture
mounting screws (EE). Do not tighten the
hex nuts (BB) at this time.

Pull the supply wires out from the outlet
box and mount the mounting bracket (FF)
to the outlet box using the bracket
mounting screws (DD).

Place the back plate of the fixture body (A)
over the outlet box and onto the fixture
mounting screws (EE).

Adjust the fixture mounting screws (EE)
until they protrude out from the back plate
1/4 in.

Remove the fixture body (A) and secure
the position of the fixture mounting screws
(EE) by tightening the hex nuts (BB)
against the mounting bracket (FF).
2
Connecting the wires

Connect the black supply wire to the black
fixture wire using a wire nut (CC).

Connect the white supply wire to the white
fixture wire using a wire nut (CC).

Connect the fixture ground wire to the
supply ground wire using a wire nut (CC).

Wrap all wire connections with electrical
tape for a more secure connection.
Installation
5
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.
DD
FF
EE
BB
CC
FF
A