3
Installation
NAME
SINGLE DOOR
PLATE WARMER
SINGLE DOOR
PLATE WARMER
DOUBLE DOOR
PLATE WARMER
MODEL
HC-1M
HC-1
HC-2
VOLTAGE
220~240V
220~240V
220~240V
POWER
400W
750W
1200W
TEMPERATURE
RANGE
30~85
℃
30~85
℃
30~85
℃
DIMENSIONS
450
×
405
×
545
450
×
485
×
850
750
×
510
×
850
WEIGHT (kg)
24
32
45.5
1. The voltage used must be coordinated with the supplied voltage.
2. User should install a suitable switch, fuse and tripod socket near the machine.
3. The body of this machine must be grounded. Do not put any insulated objects
between the body of the machine and ground to avoid any accidents.
4. Before using, check whether every connection is formed, and voltage is normal.
5. Do not open the door to insert or remove any dishes while the machine is
working in case of an accident.
6. While cleaning the machine, cut off the power first and use a wet towel with non
corrosive cleaner to clean. Do not clean the machine with a water jet.
7. The range of temperature is 20 to 110
℃
. The temperature can be controlled. The
recommended temperature setting to use is 60 to 80
℃
.
8. Do not store any flammable objects near the machine.
9. The installation of this machine must be done by technician or qualified persons.
10. Check if the installation of power supply is normal, and make sure the supplied
voltage is coordinated with the voltage.
11. Plug the machine in and turn on the power switch. The green indicator on shows
the machine is on.
12. Turn the temperature controller clockwise to set temperature according to your
requirements.
13. There are two levels in the chamber. Dishes can put on these two levels.
14. Temperature can be adjusted according to different dishes. The machine
should take about 35 minutes from start til the temperature gets to 80
℃
.
15. When temperature gets to the setting degree, the temperature controller will
cut off power automatically. When the temperature lowers than the standard
degree, the temperature controller will start to heat dishes. It will repeat.
16. After use, ensure the temperature controller is in the off position and turn off
the switch. Unplug the machine and cut off the power supply.
