12 Reset To The Initial Status & Check The Software Versions
1. Please perform the following steps to reset the XK-3 to the initial default setting.
STEPS TO TAKE
a. Switch off the power of the XK-3.
b. Holding the [REC/JUMP] Button, switch on the power.
c. Hold down / Keep pressing the [REC/JUMP] Button until "Loading Default..." appears
on the Display.
d. If everything is in order, PLAY Mode appears on the Display. (Completed)
2. HOW TO CHECK THE VERSIONS
a. Touch the [MENU/EXIT] button to display the MENU, select PAGE E by the [PAGE] button,
and then touch the [2] SYSTEM button then, "Noise Gate" page appears.
b. Touch the [PAGE UP], you can see the each software versions using [PARAM] buttons below;
VERSION - MAIN PROGRAM
VERSION - TONE INFORMATION
VERSION - KEY SCAN PROGRAM
