6. Foot Controls
If you wish to hook up an Expression Pedal, Leslie Speed Switch, Sustain/Damper Pedal or all
three, here’s how.
Expression (Volume) Pedal
We highly recommend the Hammond EXP-50 Expression/Volume Pedal. It has a heavy-duty metal
construction, and has the familiar feel and distinctive response curve of a vintage B-3 Pedal that you
just cannot find in aftermarket volume pedals. just plug it in to the EXP PEDAL jack on the back of
the
SKX
. If you choose not to use the EXP-50, you can use most any after-market Expression
Pedal, providing it has a tip-ring-sleeve (or “stereo”) plug. An audio volume pedal will not work when
connected to the EXP PEDAL jack.
Leslie Foot Switch
Many like to use a foot switch to control Leslie Speed. Use our FS-9H plugged into the FOOT SW
jack on the rear of the
SKX
.
Most likely you will want a Sustain or Damper Pedal. Simply position or damper, and we offer our
FS-9H. just position where you want it on the floor, and connect the cable to the DAMPER PEDAL
jack located on the back of the
SKX
. Many aftermarket sustain-type pedals will also work with the
SKX
.