Hammond Sk-series, Руководство по введению

Страница: 5 / 10

Introduction
3
Ë
Basic Controls
The panel controls on the Sk-series keyboard include Drawbars, Rotary Controls, Touch Tabs and Touch Buttons. These
controls allow you to make adjustments and changes on the instrument.
ON / OFF Power Switch
The ON / OFF Power Switch is located at the rear of the instrument on the left side of the
Accessory Panel (the right side if you’re in front of the keyboard(s). When this switch is in the
"ON" (pushed in at the top) position, the Information Center Display as well as some LED's
(
L ight E mitting D iodes) will light up showing that the instrument is "ON".
MASTER VOLUME Rotary Control
The MASTER VOLUME Rotary Control is located on the Control Panel to the left
of the Drawbars. With this Rotary Control, you can control the total
or maximum volume of the entire instrument. Turn this control to the right to increase the
total volume, and to the left to decrease the total volume.
NOTE: If you have an Expression Pedal connected to the SK, it will express up to the am ount
determ ined by the setting of the MASTER VOLUME Rotary Control.
Information Center Display
The Information Center Display is located in the upper center of the instrument.
The Information Center Display has two modes: (1) the PLAY mode and (2) the MENU MODE. The PLAY Mode allows
you to graphically see Drawbar settings, Extra Voice settings, Patch Numbers and Patch Names. The MENU Mode allows
you to change and edit the Sk-series keyboard's software parameters such as Drawbar Voicing, MIDI parameters and other
advanced functions.
NOTE:
The PLAY and MENU Modes are covered in the Inform ation Center Display section of this Guide.