Hammond LESLIE 2101, Руководство по обслуживанию

Страница: 7 / 22

#2101/ #2102
OVERDRIVE VOL : Min.
SETTING INPUT
1. a
DC Poewr Supply +5V PWH-68A J110-7
b
+12V J110-5
c
-12V J110-1
d
+24V J112-3
e
Remote DC OUT Remote DC JACK-Core
f
Remote DC OUT Connect to Leslie 2121 thru DCC-2 cable Remote DC JACK-Core
g
LESLIE 11PIN 11 DC OUT LES11P -PIN11
2. a
Motor Speed Control Voltage LESLIE FAST , Function sw Fast Speed Value : 9 (Preset 1) EFH-237A J208-5 VR-1 * round per mintue of Horn
b
LESLIE SLOW , Function sw Slow Speed Value : 5 (Preset 1) EFH-237A J208-5
3. a
Stationary Lch SP Level STA-L VOL Max 400Hz SINE WAVE 1Vrms LES11PIN-2 PWH-68A J104-2
b
Stationary Rch SP Level STA-R VOL Max 400Hz SINE WAVE 1Vrms LES11PIN-3 PWH-68A J104-4
c
Rotary HORN SP Level ROTARY VOL Max , HORN LEV Max , 1kHz SINE 1Vrms LES11PIN-1 PWH-68A J102-1 Leslie Fast Mode
4. a
Stationary Lch Line out Level STA-L VOL Max 400Hz SINE WAVE 1Vrms LES11PIN-2 STA-L OUT JACK
b
Stationary Rch Line out Level STA-R VOL Max 400Hz SINE WAVE 1Vrms LES11PIN-3 STA-R OUT JACK
c
Rotary Line out Lch Level ROTARY VOL Max , ROT BASS LEV Center, 1kHz 1Vrms LES11PIN-1 ROT OUT-L JACK Leslie Fast Mode
d
Rotary Line out Rch Level ROTARY VOL Max , ROT BASS LEV Center, 1kHz 1Vrms LES11PIN-1 ROT OUT-R JACK Leslie Fast Mode
5. a
Stationary Lch SP Noise Level STA-L,-R,ROTARY VOL Max PWH-68A J104-2
b
Stationary Rch SP Noise Level STA-L,-R,ROTARY VOL Max PWH-68A J104-4
c
Rotary HORN SP Noise Level STA-L,-R,ROTARY VOL Max PWH-68A J102-1
#2101/ #2102
1.0mV max (IEC"A"net)
1.0mV max (IEC"A"net)
19V rms ±2V
19V rms ±2V
15V rms ±1.5V
3.1V rms ±0.4V
4.
3.1V rms ±0.4V
300mV rms ±40mV
350mV rms ±40mV
1.0mV max (IEC"A"net)
TEST AND ADJUSTMENT
DC +12V ±5%
6.60V (400±7rpm)*
0.57±0.05V (36±1rpm)*
DC -12V ±5%
DC +24V ±1V
DC -18V ±1.5V(open)
DC -3.0V ±0.4V(on Load)
DC +5V ±5%
DC +12V ±5%
STEP NOTE SUBJECT TEST POINT
ADJUST
MENT
POINT
SPECIFICATION