LASER LINE LEVEL 3
SAFETY INSTRUCTIONS
Safety Instructions for Laser Line Level
WARNING
LASER RADIATION.
Do not stare into beam. Class II laser product. Turn the laser
beam on only when using this tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure.
The laser beam can
cause flash blindness.
• Do not
operate the tool around children or allow
children to operate the tool.
• Do not
place the tool in a position that may cause
anyone to stare at the laser beam, whether
intentionally or unintentionally.
• Do not
use on surfaces such as sheet steel that
have shiny, reflective surfaces. The shiny surface
could reflect the beam back at the operator.
• Always turn the laser tool off when not in use.
Leaving the tool on increases
the risk of someone inadvertently staring into the laser beam.
• Do not
attempt to modify the performance of this laser device in any way. This
may result in a dangerous exposure to laser radiation.
• Do not
attempt to repair or disassemble the laser device. If unqualified
persons attempt to repair this product, serious injury may occur. Any repair
required on this laser product should be performed only by qualified service
personnel.
• Use of other accessories that have been designed for use with other laser tools
could result in serious injury.
• Do not
operate the tool outdoors.
• Do not
place or store tool under extreme temperature conditions.
CAUTION
/
PRECAUCIÓN
/
ATTENTION
AVOID EXPOSURE/EVITE LA
EXPOSICIÓN/ÉVITEZ L’EXPOSITION
LASER RADIATION IS EMITTED FROM
THIS APERTURE / LA RADIACIÓN LÁSER
SE EMITE DE ESTA ABERTURA / CET OUTIL
PRODUIT UN RAYONNEMENT LASER
LASER RADIATION– DO NOT STARE INTO BEAM
RADIACIÓN LÁSER: NO MIRE DIRECTAMENTE EL
RAYO RAYONNEMENT LASER – NE FIXEZ PAS DES
YEUX LE RAYON LASER
650nm, OUTPUT ≤ 1mW/CLASS II LASER PRODUCT
COMPLIES WITH 21 CFR PARTS 1040.10 AND 1040.11
PRODUCTO LÁSER CON SALIDA ≤ 1mW.CLASE II, 650 nm,
CUMPLE CON LAS SECCIONES 21 CFR 1040.10 Y 1040.11
650 nm, SORTIE ≤ 1 mW/PRODUIT LASER DE CLASSE II
CONFORME AUX NORMES 21CFR ARTICLES 1040.10 ET 1040.11
Laser Line Level
Nivel De Línea Láser
Niveau De Ligne À Laser
CAN ICES-3(B)/NMB-3(B)
MADE IN CHINA
HECHO EN CHINA
FABRIQUÉ EN CHINE
SERIAL NO.
SERIE NO.
NUMÉRO DE SÉRIE
Model / Modelo / Modèle: HLCL04
3V 2X1.5V AAA Battery
3V Batería 2X1,5 V AAA
3V 2 piles AAA de 1,5 V
