COMPACT SELF-LEVELING CROSS LINE LASER WITH INTEGRATED TRIPOD LEG
3
SAFETY INSTRUCTIONS
Safety Instructions for Compact Self-Leveling Cross Line Laser
WARNING
LASER RADIATION.
Do not stare into beam. Class
II laser product. Turn the laser beam on only when
using this tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure.
The laser beam
can cause flash blindness.
• Do not
operate the tool around children or allow
children to operate the tool.
• Do not
place the tool in a position that may
cause anyone to stare at the laser beam,
whether intentionally or unintentionally.
• Do not
use on surfaces, such as sheet steel, that have shiny, reflective
surfaces. The shiny surface could reflect the beam back at the operator.
• Always turn the laser tool off when not in use.
Leaving the tool on
increases the risk of someone inadvertently staring into the laser beam.
• Do not
attempt to modify the performance of this laser device in any way.
This
may result in a dangerous exposure to laser radiation.
• Do not
attempt to repair or disassemble the compact self-leveling cross line laser. If
unqualified persons attempt to repair this product, serious injury may occur. Any repair
required on this laser product should be performed only by qualified service personnel.
• Use of other accessories that have been designed for use, with other laser
tools could result in serious injury.
• Do not
operate the tool outdoors.
• Do not
place or store tool under extreme temperature conditions.
635nm, Output < 1mW, Class II laser product
Complies with 21 CFR parts 1040.10 and 1040.11
LASER RADIATION - DO NOT STARE INTO BEAM
CAUTION
AVOID EXPOSURE-
Laser radiation is emitted from this aperture
Compact Self-Leveling Cross Line Laser with Integrated Tripod Leg
