Hammerhead HCSD040, Руководство по эксплуатации продукта

Страница: 12 / 20

12 4V LITHIUM RECHARGEABLE SCREWDRIVER
OPERATING INSTRUCTIONS
!
WARNING
DANGER: NEVER INSERT ANY PART OF THE TOOL, INCLUDING BIT, INTO AN
ELECTRICAL OUTLET FOR ANY REASON. NEVER TOUCH ANY PORTION OF THE TOOL TO
ANY POTENTIALLY LIVE CIRCUIT.
Failure to obey this warning could cause electric shock
and other serious personal injury.
1. How To Charge
NOTICE:
The screwdriver is shipped partially charged; fully charge the battery before
first use.
Optimum performance can be reached by recharging the tool for approximately 2 hours
after use. It is not recommended to recharge the tool for more than 24 hours after each
use. The power supply can be used with normal household voltage of 230 volt AC.
a. Insert the USB interface of the USB charging cable into the power supply.
b. Insert the charging plug into the charging port, making sure that they are properly
connected.
c. Connect the power supply (together with USB charging cable) to the power outlet.
The charging indicator light will shine orange to indicate that the tool is charging.
NOTICE:
The tool will not run when you rotate the forward/reverse selector during
charging.
d. When charging is complete, the charging indicator light will shine green. Remove
the USB charging cable from the tool.
NOTICE: Do not operate the power supply in an area of extreme heat or cold. It works
best at normal room temperature. The bottom of the tool or power supply may become
warm during charging.
1