Hammerhead HAAG060, Руководство пользователя

Страница: 12 / 20

12 6.0 AMP ANGLE GRINDER
OPERATING INSTRUCTIONS
1. Wheel guard installation
WARNING:
Always ensure the tool is switched off and the plug is removed before
making any adjustments or maintenance procedures.
WARNING:
This tool comes with the guard for grinding. Do not use this guard for
cutting purpose. Not using the guard suited to the work you are carrying out can cause
injury.
This guard has been specifically designed to offer important protection in the rare event
that a problem with the disc or item being worked on arises. Using the guard offers
additional versatility in confined spaces.
a) Open the guard latch and position the wheel guard on the spindle neck so that the
two lugs on the guard line up with the two notches on the spindle neck.
b) Rotate wheel guard into the desired working position. According to different
operation, the guard can be rotated anti-clockwise direction from 90° to 210 ° for
protection of the operator.
c) Close the guard latch to secure the guard.
1a 1b
2. Grinding Wheel Assembly
WARNING: Always ensure the tool is switched off and the plug is removed before
making any adjustments or maintenance procedures.
a) Place the inner flange on the spindle. Check to ensure that the inner flange is properly
seated on the spindle. It will cause the spindle to rotate when the backing flange is rotated.