manualshive.com logo in svg

Hammer K3 winner, Руководство пользователя, Страница: 48 / 80

Поделиться
Скачать
Hammer K3 winner Скачать руководство пользователя страница 48

48

!

!

"

#

$

%

&

(

/

$

Panel Saw

K3 basic/K3 winner/K3 e-classic

Required tools:

•  Hex key 8 mm 

•  Hex key 4 mm

•  Spanner SW 22 mm 

•  Spanner SW 19 mm (Splitter)

1. 

Prepare to change tooling.

2.

  Remove the saw blade

3.

  Remove the splitter

4.

  Remove the rear flange.

5.

  If required, remove the scoring blade.

6.

  Unscrew the 4 screws with the allen key.

7.

  Remove the loading board.

! 

Synthetic insert

" 

Screws

# 

Hex key

$ 

Flange

% 

Splitter holder

& 

Nut

/ 

Spacer ring (Rear flange)

( 

Saw blade arbor

8.11.1 Retooling to an operation with grooving tools

8.11 Grooving tools

Note:

We recommend that only original Hammer tools are used (Hammer catalogue).

For authorised grooving tools see the Technical data section.

Warning! Risk of injury!

Be wary of sharp edges to avoid cutting yourself, in particular when changing the tooling.

Attention! Risk of material damage! 

Do not adjust the 90° angle when operating with grooving tooling!

Fig. 8-25: Spacer ring/Saw arbor

Fig. 8-24: Rear flange/Splitter holder/Loading board

Making adjustments and preparations

Содержание K3 winner

















































































Отзывы:

Нет отзывов