Hammer HB 450, Руководство пользователя

Страница: 12 / 52

12
4. SAFETY
4.1 GENERAL SAFETY
All mechanical equipment can be hazardous if operated without due care orcorrect maintenance. Most
accidents involving machine operation andmaintenance are caused by failure to observe basic safety rules
or precautions. An accident can often be avoided by recognizing potentially hazardous situations before
an accident occurs.
Because it is impossible to anticipate every possible circumstance thatmight involve a potential hazard,
the warnings in this guide and on the machine are not all inclusive. If a procedure, tool, working method or
operatingtechnique not specifically recommended by manufacturer is used, you mustsatisfy yourself that
it is safe for you and others. You should also ensure thatthe product will not be damaged or made unsafe
by the method of operationor maintenance procedures you choose.
Safety is not just a matter of responding to the warnings. All the time you areworking with your
attachment you must pay attention to what hazards theremight be and how to avoid them. Do not work
with the product until you aresure that you control it. Do not start any job until you are sure that you
andthose around you will be safe.
!
Warning! Read the following warning messages carefully. They tellyou of different hazards
and how to avoid them. If proper precautionsare not taken you or others could be seriously injured.
4.2 SAFETY INSTRUCTIONS
MANUALS
Study this manual before installing, operating or maintaining the product. Ifthere is anything you don’t
understand, ask your employer or your local dealer to explain it. Keep this manual clean and in good
condition.
Study also the operating and maintenance manual of your carrier before operating the attachment.
CARE AND ALERTNESS
All the time you are working with the product, take care and stay alert. Always be alert for hazards. The
possibility of a serious or even fatal accidentis increased when you are intoxicated.
SAFETY