Hammer Strength PT-ST, Руководство по сборке

Страница: 17 / 22

Install Console Crossbar
1. Place right side of console crossbar onto right handrail.
Item Description Qty
1 Console crossbar 1
2 Upper console cable 1
3 Middle console cable 1
4 Left handrail 1
5 Right handrail 1
2. Plug upper console cable into middle console cable.
3. Lower console crossbar onto left handrail
NOTE: Do not pinch console cables.
4. While holding left handrail in place, remove two nuts from left upright.
5. Install handrail plate to left handrail and upright with four screws, eight washers, and four nuts using a 17 mm open
end wrench and 17 mm socket wrench. Torque to 20-25 ft-lbs.
Item Description Qty
1 Washer, M10.5 X 22 X 2, Flat 8
2 Screw, M10 X 1.5 X 80 mm 4
3 Left handrail and upright 1
4 Nut: Hex, M10 X 1.5 4
5 Handrail plate 1
Page 15 of 19