Hammer Strength ELT-HR, Руководство пользователя, Страница: 30 / 78

8. Install bolts, washers, and rectangle tubing nuts securing front crossmember to front training uprights using a 3/4"
wrench.
NOTE: 3-Handle Bar front crossmember shown for example.
Item Description Qty.
1 Front Crossmember 1
2 Bolt, 1/2"-13 x 1.25" 6
3 Lock Washer, 1/2" 6
4 Rectangle Tubing Nut, 11GA, 3" 2
5 Rectangle Tubing Nut, 7GA, 3" 3
6 Rectangle Tubing Nut, 7GA, 4" 4
Hand tighten hardware.
Install Extra Hardware
1.
Fill empty slots at top of front right training upright with hardware.
Item Description Qty.
1 Bolt, 1/2"-13 x 1.25" 3
2 Lock Washer, 1/2" 3
3 Rectangle Tubing Nut, 7GA, 3" 3
Hand tighten hardware.
2. Fill empty slots at top of front left training upright with hardware.
Item Description Qty.
1 Bolt, 1/2"-13 x 1.25" 3
2 Lock Washer, 1/2" 3
Hand tighten hardware.
Page 28 of 75