5
Installation and use
The following steps refer to tablets with Android system. For other
types of tablet, please refer to the instructions for the Bluetooth
connection provided with the product documentation.
Note
: It is recommended that you fully charge the battery the first
time you use the keyboard.
Connecting the keyboard to the tablet (Android)
1. Turn on the keyboard moving the power switch to the ON
position (the Power light will turn on for 3 seconds).
2. Enable the Bluetooth function of the tablet you wish to connect
by opening the
Settings
menu and selecting
Bluetooth
in the
Wireless & Networks
section.
3. Press the Bluetooth pairing button (Connect) on the keyboard
(the Bluetooth indicator will begin to flash).
4. When the tablet detects the keyboard, select
Bluetooth 3.0
Keyboard
from the list of Bluetooth devices.
5. The system will prompt a random PIN number.
Type in the PIN number on the keyboard and press
Enter
to
complete the pairing.
6. The keyboard is now successfully connected to the tablet.
Note
: If there is no signal for 10 minutes or the connected device is
turned off, the keyboard will go into Standby. Press any key to wake
up the keyboard.
Charging the keyboard
When the battery charge is low, the Power indicator will start
blinking.
1. Plug the small end (micro USB) of the charging cable into the
micro USB port of the keyboard.
2. Plug the other end of the cable into a USB port on your
computer. The Charge indicator will light up.
3. The keyboard is fully charged when the Charge indicator turns
off.