ADSL2+ Ethernet Modem
HRDSL524
7
2.2 Back Panel Connectors
The below table shows the function of each connector and switch of the ADSL2+ Ethernet
Modem’s rear panel.
Connector Description
SWITCH
Power Switch, which used to ON / OFF ADSL2+ Ethernet Modem
POWER
Connects to your ADSL router 12V DC power adaptor
RESET
Reset bottom, RESET the ADSL2+ Ethernet Modem to its default settings
LAN
RJ-45 Jack (Ethernet Cable) connects to your PC, or HUB
LINE
Connects to your ADSL2+ line – for ADSL2+ Line input
Rear View of the ADSL2+ Ethernet Modem
2.3 Factory Default Settings
Before configuration, please refer to following default settings,
Web interface
Username: admin
Password: hamlet
LAN IP Settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
DHCP
DHCP Server: Enable