8
2.4 The Rear Ports
PORT
DESCRIPTION
POWER
Connect the supplied power adapter to this jack.
RESET
After the device is powered on, press it to reset the device or restore
to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
LAN
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four
LAN ports when connecting to a PC or an office/home network of
10Mbps or 100Mbps.
ADSL (LINE)
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
Power Switch
Power ON/OFF switch
2.5 Cabling
One of the most common causes of problems is bad cabling or ADSL line(s). Make sure
that all connected devices are turned on. On the front of the product is a bank of LEDs.
Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using
the proper cables.
Ensure that all other devices connected to the same telephone line as your router (e.g.
telephones, fax machines, analogue modems) have a line filter connected between them
and the wall socket (unless you are using a Central Splitter or Central Filter installed by a
qualified and licensed electrician), and ensure that all line filters are correctly installed and
the right way around. Missing line filters or line filters installed the wrong way around can
cause problems with your ADSL connection, including causing frequent disconnections
Содержание HRDSL512W Series
Страница 1: ...WIRELESS ADSL2 ROUTER USER MANUAL www hamletcom com...
Страница 20: ...18 Step1 Set your new password...
Страница 21: ...19 Step2 Choose your time zone Step3 Set your Internet connection...
Страница 22: ...20 Step4 Restart your ADSL Router...