Hamlet HPS01NW, Руководство пользователя

Страница: 6 / 80

6
LED Indicators
LED State Indication
On (Orange) When power switched on, the Status indicator will
flash five times, and then on. The LAN port is linking
also
Blinking (one time
per second) When power switched on but LAN port is not linking
Status
Blinking (several
times per second) Data transmitting
USB On (Green) Connect with USB2.0 printer
On(Orange) WLAN enabled WLAN
Blinking Data transmitting
Before you start, you should prepare the following items:
• One Windows-based computer with print server setup CD
• One printer with a USB port
• One USB printer cable
Hardware Installation
To install the print server, you need to complete these steps:
1. Confirm that your printer USB port works well.
2. Connect the print server to the network and printer, and plug in the print server.
Follow these instructions to install the print servers, please refer to any peripheral
you are connecting to the print server:
1. Turn off the printer’s power.
2. Connect the print server to your printer with the USB cable.
3. Turn the printer’s power on.
4. Plug the AC power adapter into the power connector on the print server.
5. Wait 10 seconds until all the LEDs have stopped flashing.
Note : The Status LED should be flash five times during POST. If not, please contact your
local dealer for repair or replacement. Then WLAN LED should be on to associate with the
proper Access Point with best wireless signal. If not, please contact your local dealer for
repair or replacement