Repeater mode configuration procedure
1. Power off the HNW150APBR and slide the mode switch to
WiFi AP
.
2. Power on the HNW150APBR.
3. Configure the Internet Protocol (TCP/IP) Properties of PC to
Static IP
set to
10.0.0.3
.
4. With the PC connected to HNW150APBR, log on the web page
10.0.0.2
and enter the
username as “admin” and password as “hamlet”.
5. In the left menu click on
Wireless
>
Basic Settings
.
6. Configure the Mode to “Client”, select “Enable Universal Repeater Mode (Acting as AP and
client simultaneously)”, configure SSID of Extended Interface and then click
Apply Changes
.
7. Click on
Reboot Later
button.
