30
-
PBC Mode: The PBC (Push-Button-Configuration) mode builds the
connection by simply pressing a button on the device.
a.
Click the PBC Mode option.
b.
Click the Connect button to start WPS function of the camera.
TIP
Instead of clicking the Connect button of Configuration
Utility, you can press the WPS button if the camera is
designed with a hardware button of WPS function.
c.
You need to press the WPS button on the router (or access
point) within 120 seconds to complete the setup.
Device Status
Display the WPS configuration of the camera.
TIP
The Power LED indicates the WPS connection status by:
-
blinking 3 times when the connection is built successfully.
-
repeating 3 times of short-short-long blink when the
connection is failed.
