Hamlet HBCS2D100US страница 6 Скачать руководство пользователя

Страница: 6 / 58

1.4.2 Factory Default

By scanning the "Factory Default " barcode, all the reader parameters can be restored to the factory

configuration.

Factory Default

1.4.3 User Default Settings

In addition to the factory settings, the user can also save their frequently used configuration as the default

settings of the user, and save the current configuration information of the device as the default setting information

of the user by scanning "Save current setting as user default setting". If the reader The user has the default setting

information, the new configuration information after the operation will replace the original user default setting

information.

By scanning "Restore user default settings" can be changed to the reader user default setting information.

Save current settings as user

defaults

Restore user default settings

Содержание HBCS2D100US



























































Результаты поиска

Содержание HBCS2D100US

Отзывы:

Похожие инструкции для HBCS2D100US

Бренды по названию

Популярные бренды

Hamlet HBCS2D100US, Руководство пользователя

Результаты поиска

Содержание HBCS2D100US

Отзывы:

Похожие инструкции для HBCS2D100US

Бренды по названию

Популярные бренды