BK745
Page 19
Hamlet Solution Inset (S4) Stove User Guide
7 Further information for all stove owners
7.1 Reduced burning (Slow Combustion)
When wood is burnt slowly in a closed appliance (eg: air controls at the minimum setting), it
produces moisture and tar, which will create condensation and deposits in the chimney.
This effect can be minimised by burning hard for a short period, fifteen to twenty minutes
twice a day.
To avoid chimney problems your appliance should not be burnt at a reduced burn rate with-
out a period of fast burning. Fast burning is when the stove is burnt with a ’lively flame’ and
a higher temperature. We strongly advise against stoking the fire with wood and reducing
the air inlets before leaving the stove to extinguish (perhaps when retiring to bed) as this
can lead to a cooling of the stove and flue also resulting in incomplete combustion, sooty
deposits and high levels of pollutant gases released into the environment.
7.2 Over firing
DO NOT
over fire your appliance. Firing the stove at maximum for prolonged periods
may result in over-firing. If the chimney connector or casing glows red, the appliance is
being over-fired and this may result in a chimney fire. Other signs include warping and a red
-oxide colouring will demonstrate the over-heating of internal parts; body paint which has
turned dusty white is also indicative of such use.
7.3 Chimney fires
Used in the correct manner, with the correct fuel and regular maintenance a chimney fire
should never occur, however in the even of a chimney fire, the following procedure should
be actioned without delay:
Call the fire service—DIAL 999
Immediately close all of the air inlet supplies on the appliance, to reduce the air
supply to the stove.
Move items of furniture and combustibles away from the surrounding area of
the stove, to reduce the risk of fire and allow access for the fire service.
Ensure access to the loft space is available.
Evacuate the property.
USER GUIDE
