Introduction
System Requirements
•
Windows
2000/XP/Vista
•
One available ExpressCard slot
Package Contents
•
2 port FireWire 400 ExpressCard
•
6pin-4pin
FireWire
cable
•
Resource
CD
•
User
Manual
Installation
1. Insert the card into an available ExpressCard slot.
2. The system will detect the new device and install the required
driver automatically.
Verifying the installation
Follow the instructions in this section to verify that the controller was
installed correctly.
1. Right click the
My Computer
icon, select
Properties
, left click
on the
Hardware
tab and then on the
Device Manager
button.
2. Double click on “IEEE 1394 Bus host Controllers”. If there is no
yellow ! or ? in front of “Texas Instruments OHCI Compliant
IEEE 1394 Host Controller” the driver has started correctly.
3. To view information about the devices attached to the controller,
right click on
Devices
and select
Properties
from the context
menu, then select the tab labelled
General
.