Hamilton KHaki X-Wind, Инструкция по эксплуатации, Страница: 8 / 102

4
HAMILTON INTERNATIONAL LTD.
Chronograph functions
Remark: before starting a timing operation, the hands
should be reset to zero. If necessary, press button
B
.
Simple timing
Button
A
: Start
Button
A
: Stop
> Read time
Button
B
: Reset to zero
Timing with intermediate times*
Button
A
: Start
Button
B
: Intermediate stop
> Read 1st intermediate time
Button
B
: Restart with catch-up of elapsed time
Button
B
: Intermediate stop
> Read 2nd intermediate time
And so on...
Finally, press button
A
to stop the timing and read
the total time.
Button
B
: Reset to zero
* Only on the Quartz Chronograph GMT model
Crosswind functions
The Khaki X-Wind models are equipped with a calcu-
lator of angle of drift, which allows pilots to determine
the bearing corrections to apply in case of crosswind.
Remark: It is necessary to unscrew crowns
D
and
E
in order to carry out the procedure described below.
Procedure
1. Position the arrow of the
upper interior rotating bezel at
12 o’clock by adjusting with
crown
D
.
2. Adjust the lower interior rotat-
ing bezel to 0° by adjusting with
crown
E
.
3. Obtain wind speed and di-
rection from control tower or
weather chart.
Ex. Wind speed: 40 mph
Wind direction: 70°
4. Indicate wind direction (70)
in the window with the upper in-
terior rotating bezel by adjusting
with crown
D
.
5. Adjust the exterior rotating
bezel so that one tenth of the
speed of the aircraft is indicated
opposite the arrow .
Ex. Aircraft speed:
180 mph – indicate 18.
70
70