10
5. Wireless Microphone Parts and Specifications
(1) Mesh cover
(2) Power LED Indicator
(3) Display
(4) Power Switch (Off/Stand-By/On)
(5) Plastic Body
(6) Battery Cover
(7) Cap
(Orange Tip/Ch 1/915.00MHz)
(Blue Tip/Ch 2/918.70MHz)
Handheld Wireless Microphone (UHF 3V)
1. Open battery cover (6) and insert batteries (pay careful attention to positive and
negative pole positions). Close the battery cover.
2. Turn on microphone power switch (4) and the power LED indicator (2) will flash once then go
off. When indicator (2) stays red, it indicates battery power is low. Please change the
batteries.
3. When turning on the microphone, make sure to select the Stand-By mode for a second
before you switch to the On position to avoid any signal noise.
Wireless Handheld Microphone Specifications
Microphone Type
Wireless Dynamic Handheld
Frequency
902MHz~928MHz
Spurious Emissions
>55dBm
Power Source
2 x “AA” 1.5V Batteries (included)
Operating Time
Approx. >6 Hours
On-board Indicators
Off/Stand-By/On
Dimensions
Ø 50mm, L 260mm
Weight
0.35 lbs
Содержание VENU100AM
Страница 2: ......
