Hamilton Beach SUMMIT BBS0850, Руководство по эксплуатации

Страница: 5 / 56

120 VAC, 60Hz
Power Requirements
Use a fused electric outlet for the blender. Depending on the model of your blender, the plug will look like
the following to meet power requirements:
Ground
prong
230 VAC, 50Hz
230 VAC, 50Hz
5
Control Panel
STOP button
Stops operation
of the selected
function.
Does not shut
off power to
the blender.
Custom cycle buttons A–D
Store your favorite cycles and
recall them quickly using
buttons A–D.
START button
Starts the
selected cycle.
Display
See the
following pages
for status
messages.
UP/DOWN buttons
Press the
▲
or
▼
button to
scroll through options in the
display or to adjust settings.
POWER ON (I)/
OFF (O) button
Turns blender on
and off. (May be
on side of upper
base housing on
select models.)
PULSE button
Press and hold to
run the blender at
HIGH for
short bursts.
AUTOBLEND button
Blender automatically
stops when drink is at
the right consistency.
JUMP button
Blender automatically
changes speed from
LOW to HIGH during
the cycle. LOW/HIGH buttons
Use to select the
blending speed.
MORE
Press to display
additional text.
NOTE:
The display will show the last cycle run when
not in use.
Blender Operation – Quick Start Guide
1. Read Important Safety Instructions and Warning
Symbol Explanations before use.
2. Place the blender on a dry, level surface.
3. Make sure the power switch is OFF (O). Plug the
blender into a grounded 3-prong electrical outlet.
4. Place the container on the base with ingredients and
container lid in place.
5. Press the Power ON (I)/OFF (O) button to turn the
blender ON (I). The red LED lamp indicates that
power is ON (I).
6. Select the desired function (AUTOBLEND, HIGH,
LOW, or JUMP).
NOTE: Use the Jump Cycle for automatic speed
adjustment from LOW to HIGH during the
blending cycle.
7. Press START.