4
HOW TO USE GUIDE
USING YOUR TOASTER:
1. Put your slice/slices of bread into the slots (you can only toast two slices of bread
at any one time).
2. NOTE: Make sure the crumb tray is completely positioned in place before using.
3. Plug the power cord into the outlet.
4. Set colour control knob to your desired colour. There is 6-position level (see fig.1),
the lowest “1” is for light and the highest “6” is for dark. The bread slice can be
toasted to golden colour at the middle position.
NOTE:
4(a). Toasting colour for one slice is darker than that for two bread slices at the
same level
4(b). If toasting continuously, toasting colour for the latter bread is darker
than that for the interior bread at the same level.
5. Lower carriage handle down vertically until it is latched in place, the indicator of
Cancel “ ”will be illuminated, and the appliance will begin toasting at once.
NOTE: The carriage handle can only be latched when the appliance is plugged in.
6. Once the bread has been toasted to the pre-set colour, the carriage handle will
automatically pop up. Also you can uplift the carriage handle a little to remove
the bread readily.
NOTE: During toasting, you may also observe the toasting colour. If it is
satisfactory, you can press the Cancel button to cancel the operation at any
time, but never lift carriage handle to cancel toasting.
7. If you want to toast frozen bread, lower carriage handle down vertically until it is
latched in place, press Defrost “ ”button and the indicator of Defrost “ ”button
will be illuminated, set colour control knob to your desired colour, in this mode bread
will be toasted to your desired colour.
8. If you want to warm cold toasted bread, lower carriage handle down vertically until it
is latched in place, press the Reheat “ ” button and the indicator of Reheat “ ”
button will be illuminated, In this mode toasting time is fixed, so long as time runs
over, the carriage handle will automatically spring up and end up the reheating
process.