4
HOW TO USE DRY IRON:
1. Position the iron vertically.
2. Plug the iron into power outlet.
3. Set Steam regulating Knob to
MIN
position.
4. Preheat the iron until the indicator light goes out.
5. Now dry ironing can begin.
HOW TO USE THE SPRAY:
1. Before using the spray feature, check the fabric label for ironing instructions because
some fabrics may be spotted or stained with moisture.
2. The spray feature is particularly helpful for removing stubborn wrinkles and where
extra dampening is needed. The spray may be use with steam or dry ironing. Simply
pump the Spray Mist knob when spray is desired.
HOW TO USE AS STEAM IRON:
1. Fill the iron as described in ‘How to fill with water’.
2. Position the iron vertically and turn the Temperature Control Dial to the steam
position.
3. Plug the Cord into the electrical outlet.
4. Set the Temperature Control Dial to the steam position. Steam Ironing is only possible
when at higher temperature settings indicated with ‘MAX’ mark; otherwise the water
will leak from the soleplate.
5. Preheat the iron until the indicator light goes out. The light will turn off when the
indicated setting reaches the correct temperature.
6. Turn the Temperature regulating knob to the required setting for different types of
fabric.
7. Now steam ironing can begin.
HOW TO USE THE BURST STEAM FUNCTION:
1. The burst of steam feature provides additional steam for removing stubborn wrinkles.
It may be used with steam or dry ironing.
2. Press the Power Steam button to release the surge of steam. Pressing the button
several times may be necessary to prime the surge system.
3. Wait a few seconds for the steam to penetrate the fabric before pressing the button
again for more steam.
NOTE: For optimum steam quality, do not apply more than three
successive shots after the indicator light goes off.
