9
•
CONTROL PANEL
–
CHILD LOCK
The CONTROL PANEL LOCK is designed to prevent any changes to the settings to the refrigerator.
To enable the CHILD LOCK, press and hold the OK button for approximately 3 seconds, the CHILD
LOCK icon will turn on. The control panel will be locked until unlocked at the control panel or there
is a loss of power.
To disable the CHILD LOCK, press and hold the OK button for approximately 3 seconds until the
CHILD LOCK icon turns off and the control panel is working in normal operation mode.
•
CONTROL PANEL
–
STANDBY
The CONTROL PANEL will do dark after approximately 5 minutes of no activity
To activate the control panel, press and hold the OK button for approximately 3 seconds, the
CONTROL PANEL AND CHILD LOCK icon will turn on. The control panel will be locked until
unlocked at the control panel or there is a loss of power.
To disable the CHILD LOCK, press and hold the OK button for approximately 3 seconds until the
CHILD LOCK icon turns off and the control panel is working in normal operation mode.
NOTE:
•
IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3
TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE
THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START.
NOTE:
WE DO NOT RECOMMEND THE INSTALLATION OF THE REFRIGERATOR WHERE THE
TEMPERATURE WILL DROP BELOW 50
º
F (13
º
C) OR RISE ABOVE 110
º
F (43
º
C). THE
COMPRESSOR WILL NOT BE ABLE TO MAINTAIN PROPER TEMPERATURES INSIDE THE
REFRIGERATOR.
FOR INSTALLATIONS WHERE THE TEMPERATURES WILL DROP BELOW 50
º
SET THE
FREEZER TEMPERATURE CONTROL TO THE
“
COLDEST
”
SETTING. THIS WILL IMPROVE
THE OPERATIONS OF THE REFRIGERATOR UNDER THESE CONDITIONS.
Ø
Adjusting the Temperature in the Fresh Zone / Crisper
To adjust the temperature in the Fresh Zone / Crisper, simply move the temperature control (located at
the back of the unit just above the crisper) left to right. Temperature range is MAX to MIN.
MAX is the coldest
MIN is the Warmest