EN - 30
7. TROUBLESHOOTING
Your dryer is fitted with systems that continuously perform checks during the drying
process to take the necessary measures and warn you in case of any malfunction.
WARNING:
If the problem persists even if you have applied the steps in this section,
please contact the your dealer or an Authorised Service Provider. Never try to repair a
nonfunctional product.
PROBLEM
REASON
SOLUTION
The drying process takes a long
time.
The surface of the lint filter might be
clogged.
Wash the filter with lukewarm water.
The condenser might be clogged.
Clean the condenser.
The ventilation grills in front of the
machine might be closed.
Open the doors/windows to prevent
the room temperature from rising
too much.
There might be a layer of limescale
on the humidity sensor.
Clean the humidity sensor.
The dryer might be overloaded with
laundry.
Do not overload the dryer.
The laundry might be insufficiently
spun.
Select a higher spin speed on your
washing machine.
Laundry comes out damp at the end
of the drying process.
WARNING: The laundry that comes out hot at the end of the drying
process generally feels more humid.
The program used might not be
suitable for the type of laundry.
Check the care labels on the
laundry items, select a suitable
program for the type of laundry and
additionally, use the time programs.
The surface of the lint filter might be
clogged.
Wash the filter with lukewarm water.
The condenser might be clogged.
Clean the condenser.
The dryer might be overloaded with
laundry.
Do not overload the dryer.
The laundry might be insufficiently
spun.
Select a higher spin speed on your
washing machine.
The dryer cannot be opened or the
program cannot be started. The
dryer does not get activated when
adjusted.
The dryer might not be plugged in.
Make sure that the plug is fitted in
the socket.
The loading door might be open.
Make sure that the loading door is
properly closed.
You might not have set a program or
pressed the Start/Pause key.
Make sure that the program has
been set and the dryer is not in the
Standby (Pause) mode.
Child lock might be active.
Deactivate the child lock.
The program has been interrupted
for no reason.
The loading door might not be
closed properly.
Make sure that the loading door is
properly closed.
There might have been a power
failure.
Press the Start/Pause key to start
the program.
The water tank might be full.
Empty the water tank.
