Hamilton Beach 87330, Инструкция по эксплуатации

Страница: 8 / 31

8
Cleaning the Inside of the Storage Compartment:
For prevention of odor, place an open box of baking soda in the storage compartment.
IMPORTANT: Set both power switches (on the back of the dispenser) to the OFF position and
unplug the water dispenser before cleaning.
Use a solution of warm water and baking soda (approximately one tablespoon of baking soda to one
quart of water). This will clean and neutralize odors. Then rinse and wipe dry.
Other parts of the storage compartment including door gaskets and plastic parts can be cleaned in the
same manner.
NOTICE: To prevent damage to the water dispenser, the plastic storage parts are not to be washed in
the dishwasher.
Draining Instruction:
The dispenser should be drained before cleaning the tanks and before leaving for long vacations or
absences.
1) Set both power switches (on the back of the dispenser) to the OFF position and unplug the
dispenser.
2) Dispense water from both buttons into container(s) until no more water can be dispensed
(about 1 quart of water still remains in the dispenser). Put a container that will withstand
hot water under the hot water faucet.
3) Remove the water bottle from the dispenser.
4) Place a large bucket beneath the drain outlets on the rear of the dispenser.
5) Remove the caps and silicon stoppers from the drain outlets and allow water to drain.
Drain Outlet for
hot water
Drain Outlet for cold
water