6
How to Clean
Electrical Shock Hazard.
Do not immerse kettle,
power base, or plug in water or any other liquid.
w
WARNING
1.
With kettle unplugged, empty any remaining water and rinse.
Allow kettle to cool. To avoid scale/lime deposit buildup, empty
kettle after each use.
2.
To remove discoloration or scale/lime deposit from heating ele-
ment: Place 1/2 teaspoon cream of tartar (available in the spice
aisle of grocery store) into the kettle. Then fill the kettle 1/2 full with
water. Plug in, turn ON (
I
), and bring to boil. Turn OFF (
O
), let cool,
and rinse several times with clean tap water.
3.
Wipe the exterior of kettle with a damp cloth. Do not use abrasive
scouring pads or
powders since they may scratch the smooth surface
of the kettle.
To Remove Mesh Filter:
The mesh filter is visible through
the kettle lid opening. Pull
upwards on the tab to remove.
Rinse filter periodically.
1
2
To Replace Mesh Filter:
To replace, slide the filter back
into the slot, ensuring the tab is
facing inwards. The filter will fit
only one way.
840192600 ENv2.qxd:Layout 1 2/17/10 4:01 PM Page 6
