Hamilton Beach 40791-CN, Инструкция по эксплуатации, Страница: 4 / 30

4
Before First Use
(Priming the Pump)
2 1
4 3
5
NOTIcE: Wash all removable parts in warm, soapy water. No parts may be washed in
a dishwasher. The water pump must be “primed” before first use to work properly.
Operating without water in the reservoir can permanently damage the appliance.
Fill the removable water reservoir to
the MAX fill line with cold water and
replace securely on the back of unit.
Plug in the unit and press the ON/OFF
button to turn unit on. The amber ON
light will illuminate.
Turn the control knob to the STEAM
setting. Steam will begin to flow from
the steam nozzle.
The ready light will glow green when
the water is heated and unit is ready
for use. Place an empty container
under frothing nozzle in order to catch
any drips of water from the steam
nozzle.
Allow steam to flow for about 2
minutes. NOTE: After the ready light
initially glows green, the light may
cycle on and off during operation.
6
Turn the control knob back to the
STANDBY position.