Hamilton Beach Professional 41028-CN, Инструкция по эксплуатации

Страница: 5 / 20

5
How to Use the
Kettle
1. Plug into outlet. The base will chime and display the current
kettle temperature; the current time will flash 0:00; the start time
will show 19:99; the keep warm time will show 0; and the default
temperature setting
“ 100 ° C Red Tea/Black Tea ” will show.
2. Set time by pressing HOUR button, then press MINUTE button
until the current time is displayed.
Boiling Water
Press the ON/Standby button and the light ring will show red to
indicate heating. The base will show the current temperature of
the water. As the water is heated, the segments on the thermom-
eter icon will display at the preset temperature intervals. Once the
Kettle has finished and the water is boiling, the base will double-
chime three times.
Changing Preset Temperatures
Press the PRESET TEMP button to scroll down the thermometer
icon until the desired preset temperature is highlighted.
If the water temperature in the Kettle is above the preset tem-
perature, the base will double-chime three times and shut off
automatically. Be sure that the preset temperature is higher than
the water temperature in the Kettle.
BEFORE FIRST USE: Flip open lid and fill Kettle with water to the MAX fill line
on the Water Level Window. Press ON/Standby button to turn the Kettle ON.
The Kettle will bring the water to a boil, then shut off automatically. Discard
water and repeat 2–3 times, rinsing out the kettle each time. The Kettle is now
ready for use.
Setting a Keep Warm Time
Press the KEEP WARM button anytime before the heating cycle
ends. To set the desired Keep Warm time, press the KEEP WARM
button until the desired Keep Warm time is displayed. Once the
preset temperature has been reached, the base will double-chime
three times and start the Keep Warm countdown timer counting
down in 1-minute increments. When the timer is finished count-
ing down, the base will double-chime three times and turn off
automatically.
Programming a Start Time
Note: The maximum keep warm time is 60minutes.
Make sure that the current time is set correctly on the base. Press
the HOUR and MINUTE buttons to set the current time. Then
press and hold the PROG button for 2 seconds and
“ start time ”
will flash. continues through the HOUR and MINUTE buttons to
set desired time. After 3 seconds the Start Time clock will stop
flashing to confirm setting is complete. Press the PROG button
again to activate the Start Time function. A red light will illumi-
nate around the the PROG button to confirm the Start Time set-
ting.