HAMECO HS-9000, Руководство пользователя

Страница: 17 / 20

www.hameco-headset.com
16
HS-9000 User Manual
6.2. SWITCHING BETWEEN
PHONE AND HEADSET
Switch from desk
phone to headset
1. Lift headset from docking cradle.
2. Do not return desk phone hand-
set to receiver, as this will hang
up the call.
Switch from headset to desk
phone (without HS Link or Lifter)
1. Lift desk phone handset.
2. Dock headset, or tap the
multi-function button.
Switch from headset to desk
phone (without HS Link or Lifter)
1. Lift desk phone handset.
2.
Refer to specific desk phone
documentation. In some cases
a button must be pressed on
the desk phone, while in others
the switch from handset to desk
phone will be automatic.
6.3. CONFERENCE CALL WITH
MULTIPLE HEADSETS
The HS-9000 DECT is able to pair
with four headsets in total for con-
ferencing: one primary and three
secondary headsets.
Connect the headset:
1. Consistently press the PAGE
switch for 5 seconds, the head-
set with paired light
will flash
while searching for the headset,
consistently press the headset
mute button until the headset
status LED flashes, then the
headsets are paired. Connection
is successful when the LED pow-
ers off at the same time.
2. Repeat procedure 1 to connect
the four headsets.
Conference call
1. Press the multiple function but-
ton to connect the headsets, af-
ter this the audio will be shared
between them.
2. Dial to enter the conference call.
Ending or leaving the conference
The headset user can hang up the
phone call to end the conference. At
the same time, all headset calls are
ended.