HAMAR LASER STEALTH Series, Общее руководство по обучению

Страница: 91 / 113

87
Manually Selecting the COM Port
The A-910 Utility should automatically detect the COM
Port upon startup. If not, use the following steps to locate
the correct COM Port.
Windows XP
1. Right-click My Computer.
2. Click Properties and then select the Hardware tab.
3. Click Device Manager .
Windows 7
1. Click the Start button and select Control Panel .
2. Click the System icon.
3. In the System window, click on the Device Manager
link located under the System heading.
4. In Device Manager, scroll down to
Ports.
Expand the
listings under
Ports
to reveal all the ports installed.
5. Locate
SILICONLABS CP210x to UART Bridge
(COM x)
as shown in Figure 37 .
6. Note the COM Port listed and select that COM Port in
the A-910 Zigbee Utility software using the drop-down
arrow.
Figure 37 -- Device Manager showing COM Port for A-
910 Dongle