qCMOS Camera C15550-20UP / C15550-20UP01 Instruction manual_Ver.1.3
7
3. INSTALLATION
Avoid using or storing this camera in the following places
•
Places where the temperature is not the operating temperature indicated in the specifications
•
Places where the temperature is not the storage temperature indicated in the specifications
•
Places where the temperature varies greatly
•
In direct sunlight or near a heater
•
Places where the humidity levels are not the operating humidity levels indicated in the
specifications and where the camera may be exposed to liquid
•
Places where the humidity levels are not the storage humidity levels indicated in the
specifications and where the camera may be exposed to liquid
•
Close to a strong source of magnetism or radio waves
•
Places where there are vibrations
•
Places where the camera may come into contact with corrosive gases (such as chlorine or
fluorine)
•
Places where there is a lot of dust
How to place the camera (when the camera is placed on a table)
Place the camera with the ventilation ports to sideways.
Ensure that there is sufficient airflow through the camera fan.
(Do not block ventilation openings.)
Do not allow the ventilation ports to become blocked.
To prevent the camera from overheating, do not wrap the camera in cloth or any
other material, or in any way allow the camera’s ventilation ports to become blocked.
If the camera is being operated in a closed environment, ensure clearance of at least
10 cm from both the intake and exhaust vents when setting up the camera.
Weight of the camera
Be careful not to drop the camera when moving it as the weights of C15550-20UP
and C15550-20UP01 are approx. 3.0 kg and 2.9 kg respectively.
