Then the property sheet of
appears.
Select “CD-ROM drive” only.
As mentioned above, when using the
Adapter for the first time, a Windows@ 98 CD-ROM disc is required.
After inserting the CD-ROM disc into your CD-ROM drive, click “Next” button.
Fig.5
Then the property sheet of
appears.
Click “Next” button, and installation starts.
Wait for a while till the installation is completed.
Then the property sheet of
appears then click
“Finish” button.
The
Adapter needs to be installed twice by its
specification.( See notes.
[ Using the
Adapter
With a mouse or a keyboard being connected, you can use it as USB compatible mouse or keyboard.
After the computer has resumed from the suspended mode sleep mode press the Wake up Switch on upper
part of the
Adapter.
Notes
Refrain from installing Microsoft
operating system using only the
Adapter connected to the
keyboard or mouse.
It should be installed using the keyboard and mouse directly connected to the
or Serial port on your computer.
The keyboard and mouse attached to the
Adapter will not be operational until the Windows” fully starts.
When your computer is in the safe mode of Windows@, the mouse is unusable.
In the future of the
Adapter,
may also be usable in this state when the operating system or the
motherboard BIOS becomes compatible.
When old types of motherboard or old versions of motherboard BIOS is in use, the mouse or the keyboard may not
be usable until the Windows” fully starts.
The
Adapter provides you with two operation modes:
Keyboard mode:
Allows you to use the keyboard only.
Mouse and keyboard compatible mode:
Allows you to use the keyboard and mouse, or the mouse only,
Two different drivers are required respectively for these modes.
The USB connector of
Adapter can be connected directly to the USB port of your computer or to the
self-powered hub.
The total current for other devices to be connected to the
Adapter should not exceed 400mA.
Windows is registered trademark of
corporation.
