10
Pair mode:
The Bluetooth
®
connection must now be made between the Bluetooth
®
audio receiver and the transmitter (e.g. Bluetooth
®
dongle for MP3 player,
mobile phone, PC USB dongle).
a) Connecting to a Bluetooth
®
mobile phone/USB dongle
(with A2DP profi le):
– You must fi rst use the mobile phone or a PC USB dongle’s
Find
Bluetooth
®
devices mode to establish a connection.
– To do so, follow the instructions on the devices.
– After activating the mode, switch the Bluetooth
®
audio receiver
to the »ON« position within 5 seconds.
– The operating/pairing mode LED starts fl ashing
(alternates blue and red).
– Pairing mode is started.
– If more than one device is found, select the Bluetooth
®
receiver.
– Enter »0000« when prompted to enter the PIN code.
– You may also have to follow other instructions of the
mobile phone/PC USB dongles
(see the instructions of the device).
b) Connecting to a universal transmission dongle
(3.5 mm jack plug):
– First switch on the universal transmission dongle.
– Set the »RX 2« Bluetooth
®
hifi receiver switch to »ON« within
the next 5 seconds, the operating/pairing LED starts fl ashing
(alternating blue and red).
– If the transmitting dongle is compatible with the Bluetooth
®
receiver
(have the same Bluetooth
®
profi les), the connection is established
after a few seconds.
– You may have to follow other instructions on the
pairing mode of the transmitter.
Follow the instructions in the manual.
00014205bda.indd Abs2:10
00014205bda.indd Abs2:10
26.06.2006 11:10:53 Uhr
26.06.2006 11:10:53 Uhr
