Hama Pure Series, Руководство по эксплуатации, Страница: 5 / 27

4
Note – Connection impaired
After the headset and terminal device have been
paired, a connection is established automatically.
If the Bluetooth ® connection is not established
automatically, check the following:
• Check the Bluetooth
®
settings of your terminal
device to see whether Hama BTH PURE is
connected. If not, repeat the steps listed under
5.1. Bluetooth
®
pairing .
• Check whether obstacles are impairing the
range. If so, move the devices closer together.
• The performance can also be affected by a
weak battery.
5.3. Bluetooth
®
multipoint connection
This headset can be connected with two Bluetooth ® -
enabled terminal devices simultaneously.
• First connect the headset with the first terminal device
as described in 5.1.
• Then disable Bluetooth
®
on that terminal device.
• Next, connect the headset with the second terminal
device as described in 5.1.
• Activate Bluetooth ® on the first terminal device once
more. The headset now connects to that terminal
device automatically.
5.4. Audio playback
Note
• Note that the functions described under 5.3 .
and 5.4 . are only possible with an active
Bluetooth ® connection.
• Your terminal device must also support the
individual functions.
• For more information, please refer to the
operating instructions of your terminal device.
• Functions can still be controlled directly via the
terminal device.
• Set the volume on your terminal device to a
low level.
• Switch the headset on using the MFB button (2).
• Start audio playback on the connected terminal
device.
• Press and hold (3) to increase the
volume. A signal tone indicates if the maximum
volume is reached.
• Press and hold Volume - (1) to reduce the
volume. A signal tone indicates if the minimum
volume is reached.
• Press the MFB button (2) to start or pause audio
playback.
• Press (3) to skip to the next track.
• Press Volume - (1) to skip back to the previous
track.
5.5. Hands-free function
• Voice dialling: Press and hold the MFB button (2)
for about 1 second until you hear a signal tone.
Then say the name or number you wish you call.
• Accept/end call: Press the MFB button (2) once to
answer an incoming call or to end a call.
• Reject call: Press the MFB button (2) twice or use
your telephone to reject an incoming call.
• Press the MFB button (2) twice to call the number
of the last call.
Note
The ‘Call number of last call’ function is available
only for the device that was connected first in
multi-pairing.
Note – Call quality
To increase the call quality, make sure that you
are near the headset with your mobile phone
during the call.
5.6. Disconnecting the headset
• Switch the headset off.
• Disconnect the headset via the Bluetooth
®
settings on your terminal device.
5.7. Battery capacity
• An announcement is made and the display flashes
in red when the battery is low
• Charge the headset as described in 4. Getting
Started .
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
Make sure that water does not get into the product.