Hama PD-27W60, Руководство по эксплуатации

Страница: 4 / 39

3
your terminal device with Power Delivery. Alternatively,
connect a suitable charging cable for your terminal
device to one of the two USB outputs to charge your
terminal device.
• Charging begins automatically. The status LEDs show the
remaining capacity when the Power Pack is charging.
• The current battery status of your terminal device will
appear on this device.
• Charging ends automatically. Then disconnect the power
pack from your terminal device.
• The Power Pack will automatically switch off if it is not
connected to a terminal device.
Warning – Connecting terminal devices
• Before connecting a terminal device, check whether
the power output of the charger can supply sufficient
power for the device.
• Ensure that the total power consumption of the
connected terminal device does not exceed the limit
value (see point 8 Technical Data).
• Please refer to the instructions in the operating manual
of your terminal device.
• It is essential that you observe these specifications and
the safety instructions regarding the power supply of
your devices.
• The power pack must not be charged and discharged
at the same time!
Note – Optimised charging
• Optimised charging means that the Power Pack
recognises the connected terminal device and supplies
it with the optimal current to minimise charging time.
Warning
• Never connect the charging cable of the Power Pack to
both the input and the output of the Power Pack at the
same time. This could damage the battery.
• Do not connect any terminal devices while the Power
Pack is charging. This could damage the Power Pack
and the connected device.
5. Care and Maintenance
Note
Disconnect the product from the mains before cleaning.
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
• Ensure that no water is able to enter the product.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
7. Technical Data
USB-C input
5V 3A/
9V 3A/
12V 2.5A/
15V 2A/
20V 1.5A (PD 30W max.)
USB-C output
5V 3A/
9V 3A/
12V 3A/
15V 3A/
20V 3A (PD 60W max.)
USB output (1 + 2) 5V 2.4A / ( 12W max.)
Output total 3A (60W max.)
Battery type 3.6V/Li-Ion
Includes
8 cells typ. 3350mAh / min.
3300mAh *
Total energy typ. 96.48Wh / min. 95.04 Wh