4
5
1. Hardware Installation
1.1 Inserting the batteries
a) Remove the battery compartment cover and
insert the batteries in the correct direction in
the battery compartment (fi g. 1).
b) Reattach the battery cover so that it is securely
closed.
c) Set the ON-OFF switch on the base of the
mouse to “ON”
1.2 Connecting the USB receiver
a) Connect the USB receiver to a free USB port
on the PC.
b) Windows detects the USB receiver and installs
it into the operating system.
c) Thanks to Smart-Link technology, the standard
functions of the mouse can be used
immediately.
d) The software supplied must be installed to
assign specifi c functions to the additional
buttons on the side.
2. Battery control indicator
The control light starts to fl ash when the battery
voltage is too low. Although the mouse will still
function for some time, you should change the
batteries as soon as possible.
Note:
When you insert new batteries, the LED will
fl ash ten times.
3. DPI/mode switch
Press the DPI/mode switch (fi g. 2) to toggle between
800 and 1600 DPI. (< 3 sec.).
See point 4.2. if you want
to switch to media mode.
4. Assigning functions to the additional buttons on
the
side
4.1 Preset function (fi g. 3)
g
Installation hints
4.2 Switching to media mode (fi g. 4)
Press the DPI switch for longer than 3 seconds.
As soon as you successfully switch to media mode,
the battery symbol will light up for approximately
3 seconds. The following functions can then be used.
5. 4-way scroll wheel
The 4-way scroll wheel is ideal for displaying large
images, documents or spreadsheets. However, you
can only do this if the horizontal or vertical scroll
bars are present. To use all functions of the mouse,
in particular the 4-way scroll wheel, you must install
the software.
6. Installing the software
• The software supports Windows 2000/XP/Vista
• Uninstall any mouse software already installed.
a) Insert the enclosed CD into your CD-ROM or
DVD-ROM
drive.
Wait a moment, the installation windows opens
automatically. If this does not happen, click Start
=> Run, enter “X:\autorun” and press Enter to
confi
rm.
b) Select “Wireless/Wired Mouse” as the product
type and then click “Run Setup”.
c) Double-click the mouse icon in the task bar
to adjust the button settings to your personal
needs.
Note:
When installing the software under
Windows XP/Vista,a message may appear
referring to an unsigned driver or program.
This does not affect mouse or software operation.
Simply ignore and continue with the installation.
7. Functionality problems
If the mouse does not function as expected, ensure
that you have carried out the following steps:
• The batteries are new and inserted correctly
• The receiver is correctly connected to the
computer.
• Receiver and devices are within their
communication range (depending on location,
max. 10 m)
DPI/mode switch
Battery control indicator
fi g. 2
Zoom -
Zoom +
Universal
Forward
Universal
Back
4-way scroll
wheel
fi g. 3
Play/Pause
Media Player
start
Previous
Titel
Next
Titel
Mute (push
scroll wheel)
Volume -
fi g. 4
on-off switch
+
-
+
-
fi g. 1
00052470bda.indd Abs2:4-Abs2:5
00052470bda.indd Abs2:4-Abs2:5
05.05.2008 12:41:52 Uhr
05.05.2008 12:41:52 Uhr