4
1. Hardware Installation
1.1 Inserting the battery
a) Remove the battery compartment cover and insert
the battery into the battery compartment, observing
correct polarity (fi g. 1)
b) Replace the battery cover and ensure it is securely
closed.
c) Set the ON-OFF switch on the base of the mouse to
“ON”.
1.2 Connecting the nano receiver
a) Switch on your computer and connect the nano
receiver to a free USB port.
b) Window will detect and install the USB receiver.
c) Thanks to Smart-Link technology, the standard
functions of the mouse can be used immediately.
d) To use the full range of functions your wireless
mouse offers, you must install the provided
software (for more information, see point 6).
2. Battery Indicator Display (Fig. 2)
The battery indicator display starts to fl ash when the
battery voltage is too low.
Although the mouse will still function for some time
afterwards, you should change the battery as soon as
possible.
Note: When you turn on the mouse or insert a new
battery, the LED will fl ash 10 times.
3. DPI Switch
Briefl y press the DPI switch (fi g. 2) to toggle the sensiti-
vity between 800 and 1600 DPI (M2110: 500 and 1000 DPI).
The higher the DPI number, the more precise the scan-
ning is and the quicker the cursor will move in response
to the same mouse movement.
g
Installation hints
On/Off switch
+
-
fi g. 1
Laser Sensor
(M2110: Optical Sensor)
DPI switch
Battery indicator display
fi g. 2
Nano receiver
Slot for Nano receiver
